Updated November 2026
Cloth diapers and plastic pants for adults can give you a reusable, lower-waste option for incontinence care when you set them up correctly. This guide walks you through choosing the right absorbent layer, pairing it with a waterproof outer cover, fitting it snugly, and keeping everything clean and odor-free. Most of the problems people run into come down to fit and absorbency, and both are easy to fix once you know what to look for.
Step 1: Choose the Right Absorbency and Fit
Start by estimating how much you need to hold. Adult cloth options usually come as prefolds, inserts, or all-in-one styles, and the right pick depends on how often you void and how much.
Shopping for one? See our guide: Cloth Diapers or Disposable (2026): Which Is Better for Your Baby?.
- Light to moderate use: A single insert or a fitted style in a soft fabric is often enough.
- Heavy or overnight use: Look for thicker layers of bamboo, hemp, or microfiber, or double up inserts.
- Sizing: Measure waist and hip circumference and compare against each manufacturer’s size chart. Sizing varies widely between brands, so do not assume a baby or child size translates.
For a broader comparison of materials, see A Guide to Cloth Diaper Fabrics and Materials.
Step 2: Pair the Absorbent Layer With Plastic Pants
Plastic pants, also called waterproof covers, are the outer layer that keeps moisture from reaching clothing and bedding. Choose a cover that is one size up from your absorbent layer so it closes without pulling. Covers made of PUL (polyurethane laminate) are the most common, and they are often sold in adult sizes.
Fasten the cover over the insert so the absorbent layer sits flat against the body. Check that the leg openings sit snugly but do not dig in. Gaps at the legs are the most common source of leaks.
Checking the seal
After dressing, sit, stand, and walk for a few minutes. Run your fingers around the leg cuffs and waistband. If you feel dampness or see any gaps, adjust the fasteners or switch to a larger cover.
Step 3: Wash and Store Everything Correctly
Good washing prevents odor, stains, and reduced absorbency. Rinse soiled items in cold water first, then run a full wash cycle with a fragrance-free detergent. Avoid fabric softeners, which coat fibers and reduce absorbency. Waterproof covers should be washed separately and air-dried, since high dryer heat can damage the laminate.
Store dirty items in a lidded, ventilated pail until washing. For details on rinsing and laundering steps, see How to Launder Cloth Diapers: A Step-by-Step Guide for Clean, Fresh Results and How to Rinse Cloth Diapers Properly: A Step-by-Step Guide.
Step 4: Dry Thoroughly to Prevent Mold
Moisture left in fabric is the main cause of mildew. Air-dry in direct sunlight when possible, since UV light helps reduce staining and odor. Make sure every layer is fully dry before storing. For more on this, read Mold on Cloth Diapers: Causes, Cleaning Steps, and Prevention.
Adult Cloth Diaper Care Checklist
- Measure waist and hips and match them to the brand’s size chart.
- Choose an absorbent layer based on how much you void.
- Select a plastic pant one size larger than the insert.
- Check the leg seals after dressing and after walking around.
- Store soiled items in a lidded, ventilated container.
- Wash with fragrance-free detergent and skip fabric softener.
- Air-dry fully before storing or reusing.
Common Mistakes and Tips
- Using a cover that is too small, which causes leg gaps and leaks.
- Putting waterproof covers in a hot dryer, which can break down the laminate.
- Washing with scented products or fabric softener, which reduces absorbency.
- Leaving damp items in a sealed bin, which encourages odor and mold.
- Skipping a size check and assuming a baby or child size will fit.
Recommended Gear
A fragrance-free detergent made for cloth diapers helps keep absorbency high and avoids residue. View on Amazon
A lidded wet pail with a ventilated lid makes storing soiled items between washes more hygienic. View on Amazon
A set of PUL waterproof covers in adult sizes lets you rotate covers while others are drying. View on Amazon
FAQ
Can I use adult cloth diapers overnight?
Yes, but choose a thicker absorbent layer or double up inserts for overnight use. Check the leg seals before bed and again if you wake up damp.
How often should I wash my plastic pants?
Wash them after each use if they become soiled, and otherwise rinse and air-dry them regularly. Frequent washing can wear the laminate, so inspect them for cracks or peeling.
Should I see a doctor before switching to cloth?
If your incontinence is new, sudden, or accompanied by pain or skin problems, consult a healthcare professional first. They can help identify the cause and recommend the right products.
Conclusion
Cloth diapers and plastic pants for adults work well when the absorbent layer, cover, and fit all match your needs. Measure carefully, check the seals, and follow a consistent wash and dry routine to keep odor and leaks under control. With these steps, you can build a reusable system that stays comfortable and clean.

