Updated November 2026
Flats and covers cloth diapers are the simplest cloth system you can use: a single square of absorbent cotton folded to fit your baby, held in place by a waterproof outer cover. This guide shows you how to choose the right pieces, fold them correctly, put them on, and keep them clean and leak-free. If you are still deciding between this and other styles, Prefold vs Flat Cloth Diapers: Which to Choose and How to Use Each (2026) compares the two in detail.
What You Need for a Flats and Covers Setup
A working flats-and-covers system has only two parts, but the choice of each matters. Flats are plain, unfolded cotton squares, usually sold in a flour-sack or birdseye weave. Covers are the waterproof layer, typically PUL (polyurethane laminate) or wool, that holds the flat against the baby.
- Flats in cotton, sized for your baby’s stage (most families start with 6 to 12 flats per day)
- Covers in one size that adjusts with snaps or hook-and-loop, or in sizes that match your baby’s weight
- Pins or a fastening method if you use snappi-style closures instead of snaps
- A dry pail or wet bag for soiled items between washes
- Diaper-safe detergent, free of fabric softeners and added enzymes that build up
How to Fold and Put On a Flat
Folding determines how well the diaper contains urine, so it is worth practicing with a few flats before your baby’s first change. The most common method for a newborn is a simple rectangle, while older babies usually need a triple or tri-fold placed where the wetness hits most.
- Lay the flat on a flat surface and fold it lengthwise into thirds.
- For a newborn, fold the ends in so the flat is about 6 to 8 inches wide in the middle.
- Place the flat inside the cover with the thickest section in the front center for boys and the middle for girls.
- Secure the cover snugly at the waist and legs so no fabric shows at the edges.
For more detail on folding technique, see Folding Flat Cloth Diapers: A Step-by-Step Guide for Beginners and What Are Flat Fold Cloth Diapers and How Do You Fold Them?.
Choosing Between Snaps, Hook-and-Loop, and Pins
Covers close in three common ways, and each suits a different routine. Snap covers are quick to adjust and hold up to repeated washing. Hook-and-loop covers are forgiving on a squirming baby. Pins are the traditional option, but they require more care and practice to use safely. For a side-by-side comparison of pins and snap covers, read Cloth Diapers with Safety Pins vs Snappy Covers (2026): Which Is Better?.
| Closure type | Best for | Main drawback |
|---|---|---|
| Snaps | Quick changes, daily use | Snaps can fail if not cleaned |
| Hook-and-loop | Adjusting to growth, active babies | Hooks can snag other laundry |
| Pins and snappi | Budget setups, traditional use | Requires careful handling |
Washing and Caring for Flats and Covers
Good care keeps flats absorbent and covers waterproof. Cotton flats hold up well to hot washes, while PUL covers should be washed on warm and dried on low heat, since high heat can delaminate the laminate. Avoid fabric softener, which coats cotton and reduces absorbency. If your flats start to smell or repel liquid, a stripping routine may help, and Vinegar for Cloth Diapers: A Step-by-Step Guide to Fresh Results explains one gentle option.
Wash on a full-length cycle with a plain, diaper-safe detergent. Dry flats in the sun when possible, which helps with stains and freshness. Check your cover manufacturer’s care label, since some recommend air drying only.
Common Mistakes to Avoid
- Using fabric softener or dryer sheets, which reduce absorbency in cotton flats.
- Folding flats too thick at the front, which causes bulk and gaps at the legs.
- Drying PUL covers on high heat, which can cause the laminate to peel.
- Leaving wet flats in a sealed bag for long periods, which can encourage odor.
- Skipping a cover check, since a small tear can let leaks through without warning.
Recommended Gear
A basic set of flats and covers covers most needs, but a few supplies make daily use easier.
- Plain unbleached cotton flats, since they absorb well and wash cleanly. View on Amazon
- PUL snap covers with adjustable rise, useful as your baby grows. View on Amazon
- A wet bag for carrying soiled items away from home. View on Amazon
FAQ
Are flats and covers cloth diapers better than prefolds?
Neither is universally better. Flats offer the most absorbency control and dry quickly, while prefolds are thicker and easier to fold for beginners. Many parents keep both on hand.
How many flats does a newborn need?
Most families plan for roughly 6 to 12 flats per day for a newborn, depending on how often they wash. Check with your pediatrician if you have concerns about hydration or diaper output.
Can I use flats with a cover overnight?
Many parents add an extra layer or a booster for overnight use, since flats alone may not hold enough for a long sleep. Test your setup for a few nights before relying on it.
Conclusion
Flats and covers cloth diapers are simple, affordable to build, and easy to adjust as your baby grows. Choose cotton flats, a cover with a closure you can manage, and a washing routine without fabric softener. With a little practice folding, you will have a reliable system for everyday use.

