Updated November 2026

Cloth diapers with pins are a traditional option that still works well for many families. This guide walks you through choosing the right pins, folding a flat cloth diaper, and fastening it securely so it stays put and does not poke your baby. With a few practice runs, you can change a diaper quickly and confidently.

What You Need Before You Start

Pinning works best when you have the right supplies on hand. Gather these items before your first attempt:

Shopping for one? See our guide: Cloth Diapers or Disposable (2026): Which Is Better for Your Baby?.

  • Flat cloth diapers, usually unbleached or prefolded cotton, sized for a newborn or infant
  • Diaper pins with safety locks or safety clasps, not plain straight pins
  • A waterproof cover, such as a wool or PUL wrap, to hold in moisture
  • A changing surface with a pad and a clean, dry spot to work
  • A pail or wet bag for soiled diapers

Look for pins with a clasp or lock mechanism that closes over the point. Many parents prefer stainless steel pins with rounded heads so they are easier to grip.

How to Fold and Pin a Flat Diaper

Most parents start with a triangle fold or a rectangle fold. Both work, but the triangle fold is usually simpler for beginners.

  1. Lay the diaper flat in a diamond shape. Fold it in half lengthwise into a long rectangle.
  2. Place your baby on the diaper so the bottom edge sits at the diaper area, with the top edge at the waist.
  3. Bring the front corners up and over the baby’s tummy. Keep them snug but not tight.
  4. Insert one pin through the front layers at a slight angle, about 1 inch from the edge, and push it through to the back layer.
  5. Place a second pin in the same way, spacing the pins about 2 inches apart if you use two.
  6. Pull the fabric gently to check that the diaper lies flat against the body and does not bunch at the legs.

Always keep your fingers between the layers while pinning, and never leave the point of the pin exposed.

Checking Fit and Pin Placement

A well-pinned diaper should be snug enough to hold its shape but loose enough that you can slide one finger under the waistband. Check the following each time you change your baby:

  • The pins sit on the front of the diaper, away from the baby’s skin.
  • The legs have no gaps, and the diaper does not ride up.
  • The cover fits over the diaper without pinching the thighs.

Newborns often need a smaller fold and a lighter pin placement. As your baby grows, adjust the fold height and re-check the fit at every change.

Storing and Caring for Pinned Diapers

After use, remove the pins before placing the diaper in a pail. Keep pins in a small container so they do not get lost in the laundry or left near the crib. For laundering guidance, see How to Wash Cloth Diapers and How to Clean Cloth Diapers: A Step-by-Step Guide for Fresh, Absorbent Results. If you notice odors or leaks while pinning, Solving Common Cloth Diaper Leaks and Odors covers the most common causes.

Common Mistakes

  • Using plain straight pins instead of safety pins with locking clasps.
  • Pinning through only one layer, which can cause the diaper to shift.
  • Pulling the diaper too tight, which can irritate the skin.
  • Leaving pins in the diaper when it goes into the wash.
  • Skipping a waterproof cover, which allows wetness to escape.

Pins with a locking clasp are the most important purchase for safe pinning, so look for stainless steel pins with safety closures. A wool or PUL cover works well over a pinned flat diaper to hold moisture in. A dedicated diaper pail with a lid helps keep soiled pinned diapers contained between washes.

FAQ

Are safety pins safe to use on a baby?

Safety pins with locking clasps are designed for diaper use, but they still require care. Always keep the pin closed, keep your fingers between the layers, and check the pins regularly for bends or damage. Consult your pediatrician if you have questions about your baby’s skin sensitivity.

Do I need a cover if I use pins?

Yes, in most cases. A flat diaper absorbs moisture but does not hold it in, so a waterproof or water-resistant cover is needed to prevent leaks onto clothing and bedding.

How do I know if the pins are too tight?

Slide one finger under the waistband and along the legs. If you cannot fit a finger, or if the skin shows red marks after removing the diaper, loosen the pins and re-check the fold.

Conclusion

Cloth diapers with pins take a little practice, but a consistent folding method, safety-locked pins, and a proper cover will keep your baby comfortable. Check fit at every change and keep pins stored safely away from the wash. With these habits in place, pinning becomes a quick and reliable part of your routine.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our natural & eco parenting guides, checking product details against manufacturer specifications and owner feedback.