Updated November 2026
A washer for cloth diapers needs enough capacity, a reliable water level, and a wash cycle you can control. Choose a machine that fills fully, rinses thoroughly, and lets you run extra rinses without fuss. This guide walks you through the features that matter and how to set up your washer so diapers come out clean and absorbent.
What to Look for in a Washer for Cloth Diapers
Start with the basics. A top-loader or front-loader both work, but the features below matter more than the style.
Shopping for one? See our guide: Cloth Diapers or Disposable (2026): Which Is Better for Your Baby?.
- Adjustable water levels. Diapers need enough water to move freely. Look for a setting that fills to a high level, not just a small load setting.
- Extra rinse or deep rinse option. Multiple rinses help remove detergent residue and waste.
- Load capacity. A larger drum gives diapers room to agitate. Overstuffing is one of the most common causes of poor results.
- Sanitize or hot-water option. Many machines offer a hot cycle. Check the temperature range the manufacturer specifies before relying on it.
- Reliable drain and spin. A strong spin removes more water, which shortens drying time.
How to Set Up Your Washer for Cloth Diapers
Once you have a machine, set it up in a way that keeps diapers clean. Follow these steps for each load:
- Pre-rinse or cold-rinse soiled diapers. Remove solids first.
- Load the drum about two-thirds full. Diapers should move freely when the drum turns.
- Select the largest water level and a longer wash cycle.
- Use a cloth-safe detergent in the amount the manufacturer of your detergent recommends.
- Run an extra rinse. Confirm that no suds remain before the spin cycle ends.
- Remove diapers promptly to limit odor and mildew.
Checking Your Water and Detergent
Hard water and heavy detergent buildup both reduce absorbency. If diapers start to repel liquid, test your water hardness and cut back on detergent. Consult the detergent label and your water utility’s guidance for specifics.
Common Mistakes to Avoid
- Overloading the drum, which leaves diapers dirty and soapy.
- Using too much detergent, which builds up on fabric.
- Skipping rinses to save time.
- Leaving wet diapers in the drum overnight.
- Adding fabric softener, which coats fibers and reduces absorbency.
Recommended Gear
A few supplies make washing easier and more consistent:
- A mesh laundry bag. It keeps small parts like liners contained during the wash. View on Amazon
- A diaper sprayer. It removes solids before the wash and reduces the need for pre-soaking. View on Amazon
- A cloth-safe detergent. Choose one labeled free of optical brighteners and fabric softeners. View on Amazon
For more on keeping diapers fresh, see Solving Common Cloth Diaper Leaks and Odors and Proper Methods for Drying Cloth Diapers. If you use a sprayer, Sprayer for Cloth Diapers: How to Pick and Use One (Step-by-Step) covers setup in detail.
FAQ
Can I wash cloth diapers in any washing machine?
Most standard machines work if they offer a high water level, an extra rinse, and enough drum space. Check your machine’s manual before running diapers in an unfamiliar model.
How often should I run a hot wash?
Many families run a hot wash once a week or when odors appear. Confirm the temperature limits your diapers and washer can handle.
Should I use fabric softener with cloth diapers?
No. Fabric softener coats the fibers and reduces absorbency. Skip it entirely for diaper loads.
Conclusion
A good washer for cloth diapers has adjustable water levels, strong rinsing, and enough room for diapers to move. Pair it with a measured amount of cloth-safe detergent and consistent rinse cycles. If you run into persistent odor or leaks, consult your diaper manufacturer for care guidance.

